Fuel Tank on PK210 Truck

Tank
Tank Shell & Baffles – 3mm.
Tank Ends & Partitions – 4mm.
Hot Rolled Angle 40x40x4mm Baffle Frames.
2 No. Lifting Lugs On Tank Top Made From 8mm M.S. Plate.
Outlet - Dia. 2 1/2” W/ Gate & Emergency Valves @ Each Compartment.
Std. Fuel Type Dip – Stick.

Water Tank on PK210 Truck

Tank
Tank Shell, Profiled Ends & Baffles – 3mm.
Hot Rolled Angle 40x40x4mm Baffle Frames.
2 No. Lifting Lugs On Tank Top Made From 8mm M.S. Plate.
Outlet - Dia. 3” W/ Gate Valve @ Tank Rear End.
Dia. 1” Level Indicator @ Tank Front.
Drain / Wash Out - Dia. 2” Socket & Plug.
Access Ladder On L.H. Side – Dia. 3/4" Class ‘B’ Pipe.

Tipper Bodies
Specifications For Tipper Body on Nissan PK210 Truck

Specifications For Tipper Body on Nissan MKB210 Truck

Specifications For Tipper Body on Nissan CWB450 Truck

Enclosed Body on PK210 Truck

Body
1.5mm Profiled Sides, Front & Rear Double Door Panels.
Corner Posts – 4mm M.S. Reinforced / Profiled Plate.
1.5mm Plain Sheet Roof Panelling On Roof Bearers.
50x50x6mm Hot Rolled Steel Angle Roof Bearers @ Approx. 500mm Spacing Along Roof Length.

Low DropSide Body on PK210 Truck

Body
2.5mm Headboard & Hinged Dropside/ Rear Tailgate Panels.
Posts – 3mm M.S. Profiled Plate.
Dia. 1/2” Class ‘B’ Tarpo Rope Ties On Dropsides & Tailgate

Others
Skip loader on Nissan PK210 Truck
Skip loader on Nissan MKB210 Truck
Side loader on Nissan PK210 Truck
Side loader on Nissan CWB450 Truck
High Dropside Body on Nissan PK210 Truck
High Sided Fixed Body on Nissan PK210 Truck